|
There are many spinner targets a person can buy on the internet and most have these similar characteristics .
-
 They are made in China
- They are made of bent and welded round stock.
- Spinners are not designed to be replaced and
- You must have cutting and welding equipment to replace spinners or
frame.
We have taken a fresh approach.
Our spinner target system is designed to be
shooter friendly .
Except for the spinners and frame pieces everything that would need to be
replaced can be found at your local hardware store.
Mounts into any of our target stands. All you need is a 6" adjustable wrench
to put it together.
Free standing. Have you ever tried to hammer something into road base?...Which is
what a lot of ranges use.
Ability to change configurations easily. Set up several different configurations
cheaply
before you go to range.
Damaged spinners are easily replaced, so you don't need to worry about
trashing them. Why should you buy a whole new setup just
because you want to test the limits? If you damage the cross bar, it can be found in
any hardware store.
We are one of the very few companies offering hardened spinner target
replacements, which will work in any spinner target, providing it can be
replaced to begin with...
Most spinner set ups available are made with regular steel(a36).
Because of this the spinners targets are easily damaged. Here's a pic of a
3/16"
spinner shot with an AR-15 at 50 yards. So go ahead, go crazy. You can replace
spinners for less than a whole replacement set up.
You may never want to buy another cheap spinner set up again when you can get
easily replaceable hardened spinners.
No matter who made the target, you can replace spinners with our hardened
steel spinners which last 2-3 times longer.
Spacers are made with
PEX tubing. Very tough stuff and can be hit with pistol fire without
fracturing and can be had at any hardware or plumbing supply store..you can even
use garden hose if needed.
Spinners come in 3" diameter (for now): 
- 3/16 A36 (good for all .22 Rim fire and small caliber pistol)
- 3/16 AR400 (.40 caliber pistol or less)
- 1/4 AR400 (all pistol calibers- some rifle calibers (we are still
testing this)
- 1/4 A36 (still testing)
AR400 steel is a high hardness, high strength quenched and tempered chrome-moly,
boron treated alloy plate with good resistance to atmospheric corrosion and
impact abrasion. Far outlasts regular steel spinners found on most set-ups.
Now you can go to the range, start shooting paper targets and then
switch to reactive spinner targets with the same target stand base!
ORDER
Replacement Spinners
Questions
about the Ultimate Spinner?
Easily replaceable crossbar system. Fits
into any of our stands Uses
PEX tubing for spacers
|
